 |
2U 2 Slot
- A/C input or up to 500W 48V D/C output options
- Side-to-side cooling
- Point-to-point mesh backplane in 2-slot size
- Switch cards are not needed for prototyping
- Optional slim-line 4HP power supplies
- Single or dual IPM Sentry shelf manager (optional)
|
 |
4U 5 Slot
- 5 slot replicated mesh backplane
- Cooling side to side ( 2 x 170 CFM fans)
- Plug removable fan tray
- Dual-48VDC input terminals
- Front and rear ESD jack
- Shelf manager optional
|
 |
5U 5-6 Slot
- Rugged steel Construction
- Fits into Zone 4 Seismic Rack (NEBS 3)
- 5 slot full mesh backplane connectivity, 6 slot optional
- 700W input PSU providing 48V @ 15A
- Side to side airflow configuration
|
 |
13U 14 Slot
- 14 slot dual star backplane with integrated dual shelf manager connectors
- Dual 2nd Gen shelf managers in card cage slot 0 for easy access
- Capable of cooling over 200 watts per slot with up to 40 CFM per slot in front card cage and 6-10 CFM over RTMs
- 3 x individually removable fan trays with 2 x 120mm 48V fans each
- High speed Fans rated from 250 to 420 CFM per fan with PWM control
- NEBS compliant air filter above fans ensures even air distribution
- Rear I²C enabled dual 50A power entry modules per segment (A and B)
|
 |
13U 16 Slot ETSI
- In accordance with AdvancedTCA Standard PICMG 3.0 Rev.2.0
- 16 slot backplane with Dual Star or Full Mesh topology
- Assembly of 16 boards, 8 U, 6 HP (front) and 16 rear I/O boards, 8 U, 6 HP (on the rear)
- Two redundant power entry modules (PEM) for supply voltage -48 VDC/-60 VDC, plugged in on the rear
- Top fan shelf with three redundant hot-swap fan trays inserted at rear, for cooling of up to 300 W per board (see FRUs)
- Provisions for two shelf managers with Pigeon Point ShMM 500 for bused or radial IPMB topology
- Shelf Alarm Panel (SAP); Shelf alarm display (SAD)
|
